Scan code into the mobile website
Copyright © 2019 Wuxi Hatal Aluminium Co., LTD. Powered by www.300.cn 苏ICP备06015221号-1
Address: No. 72, Zhouxin East Road, Binhu District, Wuxi, Jiangsu, China
Switchboard:(86-510) 8506 9506 Fax: (86-510) 8506 1423
查冠军 Tel:(86-510) 8506 9506-822 Phone:86-13400033615
E-mail:guanjun.zha@hatal.com.cn
糜丽燕 Tel:(86-510) 8506 9506-800 Phone:86-13951571895
E-mail: liyan.mi@hatal.com.cn
Aluminum forging blank
Aluminum forging blank
Alloy grade for forging:
6061, 6110, 6082, 2014
Remarks: Hite develops special requirements for aluminum alloy materials
skills requirement:
Hot top semi-continuous casting
Special filtration, degassing requirements
Grain Refinement
100% ultrasonic flaw detection
Homogenization
Tail control
F state without recrystallized layer
The thickness of the recrystallized layer in the T4 state does not exceed 0.3 mm.
Recrystallization layer inspection diagram
Any change in mold, size, and extrusion conditions requires detection of the stability of the recrystallization thickness.
Alloy state: |
Yield Strength Rp0,2 [MPa] |
tensile strength Rm [MPa] |
Elongation A5 [%] |
Hardness (reference) HV10 |
6082-T6 |
330 |
360 |
10 |
110 |
Examples of performance requirements after heat treatment:
Samples for mechanical performance testing need to be taken from the head and tail of the bar.
Application products:
Automobile steering control arm, bearing housing, motorcycle front fork, gearbox, wind power equipment, semiconductor, aviation, high-speed railway, etc.